Add curb appeal to any home by making a cedar wood window box planter. This cottage window box style is simple to build and install, and easy to customize to fit your home’s style.
DIY Cedar Wood Window Box Planters for Cottage Curb Appeal
Hi, I’m Ashlea, a self taught builder, thrifter and huge sufferer of “I can make that” syndrome, I am sure you can relate!
Over on my blog, This Mamas Dance, I love to share furniture rehabs, home reno progress, and quick DIY’s that can be completed during toddler nap time.
Today I am going to show you how to build a custom wood window box that can be used all year long. This project can easily be completed in an afternoon and adds instant curb appeal to a home.
I thought long and hard about what style I wanted to build, and in the end I wanted it to be classic, yet versatile.
I live in a cottage style home, but this style of box could also work on a modern style home.
For the fall I am picturing large flowering cabbage, and in the winter mini “christmas trees” as you can see I added red geraniums for summer, and some creepy crawlers that will eventually fill in.
This DIY cedar wood window box ties in with the beautiful warm wood accents of our addition, and compliments the cottage style that I love.
How to Build a Custom Cedar Wood Window Box
by Ashlea from This Mama’s Dance
This post contains some affiliate links for your convenience. Click here to read our full disclosure policy.
Cedar Wood Window Box Materials:
DIY Wood Window Box Cost
The estimated cost to build one cedar window box is $25 (depending on your local lumber prices).
That includes the cedar boards, the screws/fasteners, the interior brackets and the 2 L brackets to hang the box; it does not include the stain.
How to Build a Custom Cedar Window Box Planter
Step 1: Cut boards to size
Cut fence boards to size. The length will depend on the size of your window. 5 ft cedar fence boards were the perfect length for my project, so I only needed to cut my side panels.
Be sure to check all boards are the same length before nailing anything. Sand all cut ends. My 2 side panels measured 9 3/4″. The 4 pieces of 3/4″ cedar square measured 8″ long.
Step 2: Attach front board
Apply glue to front edge of bottom base board. Position the base and lower face board, hold in place with clamps. Attach lower face board to bottom using glue and fasteners.
Step 3: Attach back board
Attach lower back board to bottom using glue and fasteners.
Step 4: Attach interior front supports
Attach 2 pieces of 3/4″ square to the inside of first face board using glue and fasteners, vertically and evenly staggered.
This will add additional structure to your wood window box, and tie in the 2 face pieces.
Step 5: Attach interior back supports
Replicate Step 4, by attaching 2 pieces of 3/4 “square to inside of back board.
Step 6: Add side panels and top front panel
Attach the top front panel and both side panels using wood glue and fasteners.
Step 7: Add support
Flip the wood window box face down. Attach a small corner bracket to the inside of the face front on both the right and left side.
This adds additional support to the front frame of the box, where finishing nails and glue are used . If you are using screws for the entire box, you can skip this step.
Step 8: Attach top back panel
Attach the top back panel along outside edge and to center support pieces with wood glue and fasteners.
You should now have a finished cedar wood window box!
Step 9: Drill drainage holes
Drill 3-4 holes for drainage in the bottom of the wood window box. I used a 3/8 bit.
For longer lasting wood window boxes, line with either heavy duty plastic or box liners. You may also place a small piece of landscape fabric at the bottom to keep them from drying out too quickly.
Step 10: Finish
Seal, stain or paint your window box planters for added protection.
Because I used a clear stain, I chose to finish the front with small finishing nails, so that I wouldn’t have screw heads showing. I also faced the boards rough side out for texture.
If you are going to paint or use a solid stain on your wood window box, you could use screws for this entire project- just be sure to pre-drill any holes to avoid splitting the wood.
I used treated screws for the back of the box, because they won’t show, and add a little more stability than finishing nails. If you choose to use screws, a little wood filler goes a long way!
Step 11: Install
Install your cedar wood window box planters using L brackets or corner angles and lag bolts. You can also add corbels for support like Morgan and Jamie showed here.
Related Reading: Tips for Planting Beautiful Flower Pots and Planters
I hope you are inspired to build some custom wood window boxes for you home. If you do, we’d love to see them on the Remodelaholic Facebook Page, or use the tag #imaremodelaholic on Instagram.
Please feel free to leave any questions in the comments.
More exterior window treatments to add curb appeal:
Please pin this to share and save for later!
Published 27 Aug 2016 // Last updated 24 Sept 2020